If you’ve ever walked on a composite deck on a sunny afternoon, you’ve probably noticed how low-maintenance the deck boards themselves are. No sanding, no staining, no scraping off years of old paint—just periodic cleaning and you’re good to go. But when I chat with customers who buy composite decking accessories from my company, the same question always comes up: do the screws, brackets, flashing, and trim pieces that hold the whole system together need special care too? For years, I’ve heard people write off accessories as “afterthoughts” that can be ignored once the deck is installed. That’s a mistake. As a supplier who’s spent years testing these parts in all kinds of weather, I can tell you that proper maintenance of your composite decking accessories isn’t just about keeping them looking nice—it’s about keeping your deck safe and functional for years. Let’s break down what actually works, what doesn’t, and why the parts that hold your deck together deserve as much attention as the boards above. Composite Decking Accessories

First, it’s important to remember that not all composite decking accessories are created equal. When we source parts for our clients, we prioritize materials rated for coastal, suburban, and even industrial environments because we know a deck in Florida faces salt spray, while one in the Midwest deals with snow and road salt. A lot of customers assume that because composite boards resist rot, any accessory paired with them will too. But that’s not the case. Take screws, for example. Most composite deck screws are made of stainless steel, but there are different grades: 304 stainless works great for inland decks, but 316 stainless is the only one that stands up to salt air. If you use 304 in a coastal area, you might see rust streaks within a couple of years, and that rust can leach onto your composite boards, leaving permanent stains that are hard to remove. I’ve seen this firsthand with a customer in Houston who bought cheap screws from a big-box store for his coastal deck—by the end of the first summer, half the fasteners had rusted, and the brown stains on his gray composite boards required professional cleaning to fix. So right out of the gate, choosing the right accessory for your climate is a form of maintenance, even before you finish installing the deck.
But what about after installation? Do these parts need regular cleaning or treatment? Let’s start with the most commonly overlooked accessory: flashing. Flashing is the thin metal strip that goes between your deck and your house, preventing water from seeping into the structure behind the ledger board. Most composite deck manufacturers recommend using aluminum flashing, but some customers use galvanized steel to save money. Here’s the thing: aluminum and galvanized steel are different metals, and when they sit in contact with each other (or with composite board debris), they can cause a reaction called galvanic corrosion. This corrosion eats away at the flashing over time, leading to water damage in your home’s framing, which is a way bigger problem than a little rust on a screw. A few times a year, I tell our clients to check their flashing for tears, peeling caulk, or discoloration—especially after heavy rain or snowmelt. Most of the time, a quick touch-up with a silicone sealant is all it takes, but if you spot corrosion, you’ll need to replace the flashing before it causes structural damage. That’s not a “special” maintenance task, but it’s one that’s easy to skip if you don’t know it’s important.
Brackets and supports are another set of accessories that get ignored. These are the metal pieces that hold your joists in place, especially for elevated decks. If you live in an area with high wind, those brackets take a beating. I had a client in Oklahoma last year whose deck started shifting after a tornado warning—turns out the brackets had small amounts of rust that made them weaker, and the wind had moved them slightly. The fix wasn’t hard: we sanded the rust spots, applied a rust-inhibiting primer, and tightened all the fasteners, but if he’d done that maintenance annually, he could have avoided the whole issue. For most people, checking brackets twice a year (spring and fall) is enough. Look for signs of bending, rust, or loose screws. If you see rust, don’t just paint over it—sand it down to the bare metal, apply a primer designed for outdoor use, and then touch it up with a matching finish. Paint alone won’t stop rust from spreading on metal brackets that are exposed to the elements.
Now, let’s talk about trim and fascia boards, which are the composite pieces that line the edge of your deck. These are often made of the same material as your main deck boards, but many people don’t realize they can still need special care. The main difference is that fascia is more exposed to sun, rain, and debris than the boards underfoot. Over time, UV rays can cause composite fascia to fade or crack, especially if it’s a lower-quality composite with less UV stabilizer. Cleaning your fascia isn’t the same as cleaning your main deck, either. A pressure washer on too high a setting can etch the surface of composite, and harsh chemicals can discolor it. We recommend using a mild dish soap and a soft-bristled brush for routine cleaning, and a composite-specific cleaner for tougher stains like mildew or bird droppings. If you notice small cracks in your fascia, a touch-up coat of composite-safe sealant can prevent water from seeping in and causing the crack to get bigger. That’s a simple task, but it makes your deck look finished and prevents small issues from turning into expensive repairs.
One question I get all the time is: do composite decking accessories need to be sealed, like wooden deck parts? The short answer is no—not usually. Composite materials are designed to resist moisture and UV damage, so sealing them doesn’t do much for their performance. But metal accessories, like screws and flashing, absolutely need protection. For stainless steel screws, most good quality ones come with a pre-applied coating that prevents rust, but if you’re using a custom screw for a specific project, you can buy a clear rust-inhibiting spray to apply after installation. Just make sure the spray is designed for outdoor use and compatible with stainless steel—some paints and sprays can cause corrosion if they’re not formulated right. For flashing, as I mentioned earlier, caulk is your best friend. Silicone caulk is flexible, so it moves with the flashing when temperatures change, which means it won’t crack and peel like acrylic caulk. A bead of caulk along the top of the flashing where it meets your house will keep water out, which is way more important than sealing the metal itself.
I also want to address a common myth: that all composite decking accessories are durable forever. I’ve been in this business for 12 years, and I’ve seen parts fail that people swore would last a lifetime. The problem usually isn’t the quality of the accessory—it’s the lack of regular maintenance. For example, a customer in Colorado installed a deck 10 years ago with all our top-of-the-line accessories, and he only had to replace one bracket because he checked it every spring. Another customer in the same state installed a deck with cheaper accessories and never checked them—his deck had to be reinforced after 7 years because the brackets had completely rusted through. That’s a $2,000 repair he could have avoided with 10 minutes of maintenance a year.
So what does a real, practical maintenance routine for composite decking accessories actually look like? It doesn’t have to be complicated or time-consuming. Let’s break it down by season:
Spring: This is the best time to do a full check. Start by clearing debris from between the deck boards and around the accessories—leaves, twigs, and dirt can trap moisture against metal parts, causing rust. Next, check all screws for tightness: if any are sticking up or are loose, tighten them. For coastal or snowy areas, inspect all metal parts for rust spots. For brackets, sand small rust spots, apply primer, and touch up paint. For flashing, check for tears or peeling caulk, and re-caulk if needed. Finally, take a look at your fascia boards—clean them, and touch up any small cracks with composite sealant if necessary.
Fall: Before the snow and cold hit, do a second check. Make sure all fasteners are still tight, since temperature changes can cause metal to expand and contract, leading to loose screws. Remove any leaves or standing water from under the deck—this is where mold and mildew can grow, and it can also attract pests that might damage your accessories. For areas with heavy snow, make sure your brackets and supports are strong enough to hold the weight of snow. If you have a lot of overhead trees, trim back branches so they don’t scratch or damage your fascia over the winter.
Routine cleaning: Every few months, give your accessories a quick wipe down. For metal parts, a mix of warm water and white vinegar works great to remove salt stains or grime—just make sure to rinse it off with water after, so the vinegar doesn’t eat away at the metal over time. For composite fascia, a soft brush and mild dish soap is all you need—avoid bleach, which can discolor composite material, and avoid pressure washers, which can damage the surface.
Now, I want to be clear: this isn’t “special maintenance” that requires fancy tools or chemicals. It’s just taking a few minutes to check the parts that hold your deck together, instead of only focusing on the pretty boards. The deck boards are what you look at, but the accessories are what keep your deck safe. I’ve had customers tell me that they spent a lot of money on high-quality composite boards, but skimped on accessories, and within a few years, their deck had issues that could have been prevented. As a supplier, my job isn’t just to sell you parts—it’s to make sure your deck lasts as long as it’s supposed to. That means being honest about what needs care, not just telling you that our products are the best.
I’ve seen too many homeowners make the mistake of treating composite decking accessories as an afterthought. They pick out the perfect composite boards, get a great deal, and then buy whatever screws and brackets are cheapest at the store. But when those parts fail, they don’t just have to replace a screw—they might have to fix a rotted ledger board, or re-install a whole section of deck. The small amount of time you spend maintaining your accessories saves you way more money in the long run.

If you’re planning a new deck, or if your old deck is due for maintenance, we can help you pick the right accessories for your climate. Whether you live in a coastal area with salt spray, a snowy area with road salt, or a dry area with high UV exposure, we have parts designed to stand up to the elements. We also offer maintenance kits tailored to composite decking, so you have everything you need to keep your accessories in good shape. Don’t wait until a small problem turns into a big one—reach out to our team to discuss your composite decking accessory needs and get personalized advice for your deck.
Composite Decking References:
- International Code Council. 2021 International Residential Code.
- Composite Decking Manufacturers Association. “Guidelines for Composite Deck Maintenance and Accessories,” 2020.
- American Galvanizers Association. “Galvanic Corrosion in Outdoor Metal Assemblies,” 2019.
- Coastal Construction Manual, U.S. Department of Commerce, 2021.
- “Best Practices for Composite Fascia Care,” Deck Magazine, Vol. 15, No. 3, 2022.
LIVING GREEN
We’re well-known as one of the leading composite decking accessories manufacturers and suppliers in China, also support custom service. Please feel free to wholesale high quality composite decking accessories at competitive price from our factory. For more information, contact us now.
Address: Building 1-1 West, Tangpu Industrial Park, Dishu Street, Anji County, Huzhou City, Zhejiang Province, China
E-mail: Sheena@bosendecor.com
WebSite: https://www.bosen-wpc.com/