Posted in

What are the materials used in the core of an indoor current transformer?

If you’ve ever walked into a commercial building, a power substation, or even a busy industrial plant, you’re standing near hundreds of small, unassuming devices doing the heavy lifting to keep electricity flowing safely and reliably. Indoor current transformers (CTs) are among these unsung heroes. Their core job is straightforward: measure high AC currents without risking the safety of monitoring equipment or personnel, by stepping down high currents to manageable, safe levels that can be read by meters, relays, or control systems. As a supplier who’s worked with indoor CTs for over a decade, I can tell you the secret to a CT that works consistently for years isn’t just in its design—it’s in the materials used for its core. That core is the beating heart of the device, and choosing the right materials makes all the difference between a CT that fails prematurely and one that serves its owners for decades. Indoor Current Transformer

Let’s start with why the core matters. Unlike a power transformer, which handles power transfer, a current transformer’s purpose is strictly current measurement and protection. Its core is a closed-loop structure that creates a low-reluctance path for magnetic flux. When a high current flows through the CT’s primary conductor, it generates a magnetic field inside this core. That magnetic field induces a proportional current in the secondary winding, which is connected to monitoring gear. If the core isn’t made of the right material, the magnetic flux will leak out, or the core will become saturated when currents spike—two issues that lead to inaccurate readings, overheated components, or even the CT stopping working entirely when it’s needed most for fault detection.

For most indoor applications, which are typically low-humidity, temperature-controlled, and free from harsh outdoor elements like rain, salt, or extreme temperature swings, the go-to core material is electrical grade silicon steel—often just called “electrical steel” or “silicon iron.” I’ve seen this material used in thousands of indoor CTs, and for good reason. It’s a combination of iron mixed with a small percentage of silicon, usually between 1% and 4.5%, that changes its magnetic properties dramatically. Adding silicon reduces the material’s core loss—energy lost as heat when the magnetic field flips back and forth with the AC current. Lower core loss means the CT runs cooler, doesn’t waste energy, and can handle consistent loads for years without overheating.

Not all silicon steel is the same, though. When I was just getting started in the CT business, I learned the hard way that using low-grade silicon steel from a cheap supplier leads to messy results. Our first batch of CTs for a grocery chain’s electrical upgrade had core loss rates 20% higher than they should have been. After six months, half the CTs were tripping off during peak holiday load because their cores were overheating and saturating. We had to replace every single one, eat the cost, and switch to a higher grade of silicon steel called grain-oriented electrical steel (GOES). This is the type we use now for nearly all our standard indoor CTs, and it’s the same material recommended by most power engineering standards for indoor applications.

Grain-oriented steel is rolled in a specific way so that its crystalline structure aligns in the direction of the magnetic flux. That alignment makes it even more efficient at conducting magnetism, cutting down on both core loss and magnetizing current—the small amount of current that’s needed to create the magnetic field in the core. For indoor CTs, where accuracy is non-negotiable—you need to know exactly how much current is flowing to avoid overloading circuits or missing a fault—this is a huge benefit. We use GOES with a thickness of 0.35 mm or 0.5 mm for most of our medium and low-voltage indoor CTs. Thinner steel works better for higher-frequency applications, which are common in newer buildings with LED lighting, variable-speed HVAC systems, and other electronics that create non-sinusoidal currents. Thicker steel is more durable and works well for standard 50/60 Hz industrial and commercial power, which makes up 90% of the indoor CTs we supply.

But what about smaller indoor CTs, like the ones used in residential panel meters or small commercial control systems? For those, we don’t use bulk silicon steel cores. Instead, we turn to a different material: permalloy. Permalloy is an alloy of nickel and iron, usually around 80% nickel and 20% iron, that has extremely high magnetic permeability. That means it creates a very strong magnetic field with almost no magnetizing current—perfect for small, low-current CTs where even a tiny amount of error can throw off residential energy bills. I’ve worked with permalloy cores for over a decade, and the accuracy we get with them is unmatched for small indoor applications. The downside is that permalloy is more expensive than silicon steel, so it’s not the right choice for large, high-current CTs that need to be cost-effective for industrial plants. But for small, precise indoor CTs used in homes and small businesses, it’s the only material that makes sense.

Another material we use for special indoor CT applications is amorphous metal. Wait, I know that sounds like something out of a science fiction movie, but it’s a real material used in high-performance CTs. Amorphous metal is made by cooling molten metal alloy so quickly that its atoms don’t have time to form a regular crystalline structure. This non-crystalline structure gives it even lower core loss than silicon steel or permalloy. For CTs used in data centers, hospitals, or other critical facilities where power outages could be catastrophic, amorphous cores are the gold standard. These facilities need CTs that can provide accurate readings 24/7, with almost no energy waste and no overheating, even when currents are stable for years. We’ve supplied amorphous core CTs to three major data centers in the past two years, and they’ve reported zero core-related issues in that time. The only tradeoff is cost—amorphous cores are about 30% more expensive than high-grade GOES, so we only recommend them for indoor applications where reliability is non-negotiable and cost isn’t the primary concern.

Now, it’s not just the type of core material that matters—it’s how the core is constructed. Even the best material will fail if it’s not assembled correctly. For silicon steel cores, we cut the material into thin, stacked laminations. Each lamination is coated with a thin insulating layer, usually made of ceramic or organic resin, to prevent eddy currents from forming between the layers. Eddy currents are small electric currents that flow through the core material when it’s exposed to a magnetic field, and they create heat and waste energy. If the laminations aren’t insulated, eddy currents will be high, leading to overheating and reduced accuracy. We stack the laminations in a specific shape—either a rectangular “window” core or a toroidal (donut-shaped) core—depending on the CT’s design. Toroidal cores are more efficient because they have no air gap, which reduces reluctance and magnetic flux leakage. That’s why we use toroidal cores for most of our high-accuracy indoor CTs, even though they’re a bit harder to manufacture.

For permalloy and amorphous cores, we use similar lamination processes, but these materials are more brittle than silicon steel, so we have to handle them more carefully. We also use epoxy coating on the finished cores to protect them from dust and moisture, even though indoor environments are less harsh than outdoor ones. A few years ago, a customer reached out to us with a batch of CTs that had failed after two years in a office building in Florida. They thought it was a core issue, but when we inspected them, we found that the epoxy coating had degraded slightly, allowing dust to get into the core and reduce its magnetic efficiency. That’s why we upgraded our epoxy coating to a more durable, UV-resistant formula, and we haven’t had that issue since.

I know some people might ask, “Why not just use plastic or copper for the core?” The answer is simple: those materials don’t have the right magnetic properties. Copper is a conductor, not a magnetic material, so it can’t create the closed magnetic loop needed for a CT core. Plastic is non-magnetic, so it would just let the magnetic flux leak away, making the CT completely inaccurate. Any CT that works as intended has to have a magnetic core made of one of the materials I’ve talked about—there’s no way around that.

As an indoor CT supplier, my job isn’t just to sell you a device that meets your specs. It’s to make sure it works reliably for as long as possible, which starts with choosing the right core materials. Whether you need a low-cost CT for a small commercial building, a high-accuracy CT for a hospital, or a zero-failure CT for a data center, we can tailor the core materials to fit your needs. We don’t cut corners on core quality—because I’ve seen what happens when you do. I learned my lesson the hard way with that first batch of bad silicon steel, and I’ve never forgotten that the core is the most important part of any indoor CT.

If you’re working on a new electrical project, upgrading your facility’s monitoring system, or replacing old CTs that are giving you trouble, I’d love to talk about how our indoor CTs can meet your needs. We work with a wide range of industries, from commercial offices to industrial plants, and we’re happy to provide custom solutions if your project has unique requirements. Feel free to reach out to our team to discuss your needs, get a quote, or ask any questions you have about CT core materials or performance. Let’s make sure your electrical system is safe, accurate, and reliable for years to come.

Cable Accessories References

  1. American National Standards Institute. (2018). ANSI C57.13: Requirements for Instrument Transformers.
  2. Electric Power Research Institute. (2020). Material Selection for Core Components in Medium-Voltage Current Transformers.
  3. Passmore, J. (2019). Magnetic Core Materials for Low-Current Precision Instrument Transformers. IEEE Transactions on Industrial Applications.

Wenzhou Best Imp. & Exp. Co., Ltd.
With abundant experience, we are one of the most professional indoor current transformer manufacturers and suppliers in China. Please feel free to buy durable indoor current transformer made in China here from our factory. Quality products and good service are available.
Address: Room 306, Building 14, Area C, Wuzhou Electrical Appliance City, No.3999, Liujiang Road, Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province
E-mail: admin@bestenergytech.com
WebSite: https://www.besthvelectric.com/