Is driving one of the world's largest mining trucks on your personal bucket list? If it's not, perhaps it should be.
Standing as tall as a two-story house, the Caterpillar 789D is a touch larger than the average pickup truck. Armed with a quad-turbocharged diesel engine that cranks out 2,100 horsepower and 6,400 pounds-feet of torque at a lazy 1,800 rpm peak, it's a bit more powerful, too.
The mining hauler may not be the largest dump truck on the planet, but it is sizable with 200 tons of payload capacity available in the rear-dump bed (the largest trucks can haul double that). Mining companies regularly use these trucks to haul copper ore, coal and other commodities on round-the-clock schedules. Keeping these multimillion-dollar rigs moving is critical: If they aren't going down a haul road, loading up or dumping, they aren't making any money.
When fully loaded, the Caterpillar 789D weighs up to 715,000 pounds. Put in perspective, it would take more than 165 Ford F-150 4x4 pickups to equal the same mass as a 789D hauling rock. Standing next to this giant, the king of pickup trucks looks like a mere plaything.
The mining brute is smart, too. The 789D packs a wide range of technology like the F-150 — and in some areas offers more intelligence, as we recently discovered during a test drive at Caterpillar's 6,500-acre Tinaja Hills Demonstration & Learning Center near Tucson, Ariz. Example: A camera mounted on the dashboard watched our facial expressions and eyelids — through our sunglasses — and reminded us on more than one occasion to keep our eyes on the road.
Before each shift begins at a mine, a haul-truck operator typically performs a brief walk-around inspection, which Brad Cook, a Caterpillar instructor and veteran mine-equipment operator, guided us through. He pointed out that tires are one of the most expensive maintenance items on these machines, so good treads are critical. This rig had six 57-inch rims holding 12-foot-tall Michelins — two in the front and four in the back — each costing upward of $50,000 to replace.
We climbed up a tall flight of stairs crossing in front of a giant radiator core that cools the truck's howling V-16 diesel engine — all 78 liters of it. Standing on the canopy, where the operator's cabin sits, we got a good look at Caterpillar's 2.25-mile off-road course. Cook pushed a button at the top of the railing, and a motor retracted a section of stairs so we could get on with our desert run.
Taking note that the cab's doors were hinged at the rear, we ducked inside, buckled our seat belt and shut the door. The roar of the diesel subsided into faint background noise that enabled us to have a normal conversation.
"It's just like driving a pickup," Cook said from the passenger seat. He instructed us to hit the horn, "in case somebody snuck up on us," and gestured toward the parking-brake release.
Mining trucks have several ways of stopping, which is a good thing when you are hauling 200 tons of earth. Components within the oil-cooled, multiple-disc brakes work together to provide parking, main, secondary and retarder brake capability at each wheel.
A traditional brake pedal next to the accelerator activates the main service brakes, while a third pedal — which is not a clutch — hits the secondary brakes. A lever to the right of the steering wheel allows drivers to retard speed more precisely. We found this handle useful in slowing down the truck predictably under normal driving. The engine also had an automatic retarder that kicked in during downhill runs; this feature is intended to save brake life.
Cat's haul truck uses a six-speed powershift transmission that allows drivers to preselect their top gear before pulling away. We started out with the preselector in 5th gear, then threw it into 6th as we approached the 789D's top speed of about 35 mph. Each gear change was as crisp as a well-tuned muscle car's. Some mining trucks have electric motors at each wheel, but this truck is an example of an all-mechanical monster, with double-reduction planetary gear sets driving power to the ground.
In terms of engine speed, 2,000 rpm was the end of the world. When really hustling, we averaged between 1,600 and 1,800 rpm during our lap around the desert. Did we mention that this truck had an optional 1,000-gallon fuel tank? The standard tank is 550 gallons. That's how much diesel you'd burn during a typical 12-hour shift. Under normal conditions, you'd be in good shape if you were getting 0.3 mpg.
Blind spots were everywhere. Camera screens provided a 360-degree view around the truck, and proximity sensors alerted us to nearby objects. Cook reminded us to keep to the left of the road, "just like driving in Australia," he said. Because it is such a long way to the other side of the truck — the 789D is more than 25 feet wide — judging distances is easier near the cab, he noted. Many mines run on the left-hand side of the road so truckers are less likely to hit each other.
Our test track felt like a mine, with rocky outcroppings and precipitous drops at the road's edge. Steering was surprisingly sensitive. Wrenching on the wheel too much at first, it felt as though the Earth moved. U-turns took a bit more space than a long-bed pickup: Caterpillar boasts that this truck has a tight turning circle of more than 90 feet, which felt to us like turning on a dime. Perspective changes when you are driving a giant truck.
"The novelty does wear off," Cook said.
Cars.com photos by Tudor Van Hampton
That thing got a Hemi??
I don't think it would fit in my carport.I just have that feeling ;}>
Love stories about these giants.
I like CAT. Years ago my step father in the States went out and bought CAT shares, because he liked them.
CAT has a large following in Australia. Many country boys go out and buy CAT mudflaps and CAT stickers to put on their B & S utes and Landcruisers.
CAT has successfully value added with work and dress boots, small models, etc.
http://s119.photobucket.com/user/Teabag_album/media/Patrol%20Technical/IMG_1104.jpg.html
http://www.boostclassifieds.com.au/database/carsforsale/files/2002_Ford_Falcon_Ute_8866534.jpg
Uh oh...this story isn't about pickups...wait for it!
That's one serious truck though!
I was surprised how easy it is to drive. I bet even Bruce Jenner (call me Caitlyn) could even drive one wearing a dress.
Cool story, thanks for posting!
1800 rpm is probably not so "lazy" on an engine that size.
78 liter, V16, 6,400lbs/ft! Holy Crap!
@PUTC did you have to put the F150 in the picture?
I guess we know who sponsores this site.
I know it's for size comparison. Yea right
Can't just make a decent comment about the story just don't make one at all.
What story's? This is a add
I'm hoping you hooked the F150 up to it to see if you could pull it. That would be way more impressive than pulling a space shuttle on pavement.
I expect to see Roadwhale telling us that nobody really needs a truck that big.
Hello PUTCers! Glad many of you enjoyed the monster truck story. Just to set the record straight, Ford delivered the F-150 to Tucson for my use while I was visiting Cat's facilities. It was solely my decision to use the Ford truck—PUTC had nothing to do with it. I simply wanted to drive the new F-150—I had not yet had an opportunity to do so—and the manufacturer obliged. Thanks for listening, and keep on truckin'!
MSHA approves Cummins-powered Ram underground mining truck on June 29, 2011
"The 175-hp (130 kW) Cummins 6.7L Turbo Diesel in the Ram is the only truck engine certified by the MSHA for use in coal and metal/nonmetal mining for all 50 states. This certification is based on the truck’s combination of high payload, a low-emissions engine, and maneuverability in confined spaces. Through emissions reduction, including a 42 percent particulate index reduction and a ventilation rate decrease of 10 percent from the previous certification, mine operators can reduce their annual expenditure on mine ventilation by thousands of dollars for each Ram in their fleet."
Wow only 27hp per liter? a 78 liter Ecoboost or even a Ford Diesel would murder this thing in HP/L
A remember a couple of decades ago I was at a pit and a guy had bought a new Ra... er, actually, back then, they weren't too embarrassed to call them a Dodge. Anyhow, he had bought a new Dodge diesel. He was backing up a truck similar to the above (but a Wabco) and completely crushed the front of his pickup. One of the most hilarious things I have ever seen.
They have women driving these in the mines in Australia, as they have a better safety record then men. Hitachi has made the automated so they can basically run 24/7 for their Trucks
Hitachi Automated Dump Truck http://www.miningaustralia.com.au/news/hitachi-to-trial-automated-trucks-at-meandu-coal-m
Great story!!!! Nice change of pace yall
Looking at the Cat and the F-150, takes me back to childhood, playing with my Tonka truck and Matchboxes--the scale was just about right.
@Robert Ryan--Is this the same Hitachi that makes the grills and small lawn equipment. I have a two stroke weed trimmer, blower, and chain saw made by Hitachi. I remember the Hitachi grills were a big thing in the US in the mid to late 70's.
With a 6 foot lift and some knobby 18 foot hoops, bet I'd look mighty badass pulling this thing up in front of BillyBobs on Saturday nights.....
Aren't these engines much like diesel locomotives? Modern diesel locomotives are actually diesel-electric, where a diesel engine turns the electric motors, which in turn turn the wheels of the locomotive (traction motors).......are these giant haulers like that?
Locomotives also have dynamic braking, in which the traction motors reverse themselves, thus slowing down the train. (Dynamic braking by itself cannot stop a train, it is best used when descending a grade). The excess heat is vented out the roof of the locomotive..........do these giant haulers also use dynamic braking?
M. Smith - the video pointed out that this beast was gear driven. Many are as you described, diesel/electric.
Great for getting out of Traffic jam's.... Just drive over whatever is in front of you and, GO Go Go!
The comments to this entry are closed.
©2019 PickupTrucks.com. All Rights Reserved.